PVC / PE Single Wall Corrugated Pipe/Hose

PVC corrugated pipe Introduction:

The main raw material is PVC , extruded by extruder machine, it is a new type tube developed from 70S.PVC single-wall corrugated pipe USES the circular groove structure, can have both hard PVC tube of rigid and flexible hose, therefore make the pipe has the characteristics of the firm with soft, it can be used for conveying some liquid and gas as well as embedded wire casing. Single-wall corrugated pipe both inside and outside surface of corrugated, although its bending rigidity, flexibility, but its fluid resistance is big, and easy to make the screw slot on the inner surface deposition of suspended solids.So PVC single wall corrugated pipe wall is thinner, strength requirement is very high and need freedom small-bore tube bending, such as threading pipe, line pipe and the exhaust pipe, etc.Single-wall corrugated pipe with inside or outside of the basic structure parameter, other such as wall thickness, wave, wave thickness are determined based on inner or outer diameter.Corrugated highly available wave deep coefficient K said, it is the ratio of the corrugated tube outer diameter and inner diameter, the greater its value, the height of the corrugated is higher. Bellows waveform, press along the axial slit after geometry can be divided into spiral, U, C, S, V, and Ω, waveform on the stiffness and strength of pipe has a certain influence.Ordinary PVC single wall corrugated pipe and PVC pipe production technology of the main difference is that the extrusion circular cross section of the tube billet, strike in corrugated type blow molding mold molding for corrugated pipe, after detailed sees, narrate the process flow, production process and forming principle.

Feature of PVC Single Wall Corrugated Pipe:

Uv protection, flame retardant, resistance to high temperature, pressure and practical life is strong. After deformation of pipe diameter does not exceed 10% of the original pipe diameter, Corrugated tube not fracture flame retardant grade where V0 HD in pulling heavy tube 1500 Newton.ipe inside and outside the wall smooth flawless and protuberant, bending around 90 degrees, 100 times is not failure. Flexibility, high temperature resistance, friction resistance: have SGS material performance testing, through the ROHS environmental protection authentication. Chemical properties: acid, alkali, inorganic salt, water, lubricating oil, corrugated hose bend excellent performance, good chemical corrosion resistance, mechanical strength, anti-aging, heat resistance, carrying capacity, can bear the weight of the foot, don't break, can quickly recover, and itself without any damage.

Spec of PVC Single Wall Corrugated Pipe:

spec	weight(g/meter)	Inner diameter	Outer diameter	thickness	Depth of Ripple
20MD	60g/meter	15(+0.1)(-0.4)mm	20(+0.1)(-0.3)mm	2.5mm	1.5mm
25MD	110 g/meter	20(+0.1)(-0.5)mm	25(+0.1)(-0.4)mm	2.5mm	1.5mm
32MD	155 g/meter	25(+0.1)(-0.5)mm	32(+0.1)(-0.4)mm	3.5mm	2.5mm
40MD	190 g/meter	32(+0.1)(-0.5)mm	40(+0.1)(-0.4)mm	4mm	3mm
50MD	230 g/meter	42(+0.1)(-0.5)mm	40(+0.1)(-0.4)mm	4mm	3mm
20HD	100 g/meter	14(+0.4)(-0.1)mm	50(+0.1)(-0.3)mm	3mm	2mm
25HD	155 g/meter	18(+0.4)(-0.1)mm	25(+0.1)(-0.4)mm	4mm	3mm
32HD	210 g/meter	24(+0.4)(-0.1)mm	32(+0.1)(-0.4)mm	4mm	3mm
40HD	230 g/meter	31(+0.4)(-0.1)mm	40(+0.1)(-0.4)mm	4.5mm	3mm
50HD	320 g/meter	41(+0.4)(-0.1)mm	50(+0.1)(-0.4)mm	4.5mm	3mm

Selling Points:

1. Color, material, length and thickness all are customizable.
2. The products sell well in all provinces, municipalities and autonomous regions, and exported to Europe, America, southeast Asia and the Middle East and other countries and regions. Our factory warmly welcome the masses of customers at home and abroad to come to contact, negotiate and distribution. At the same time also can according to the requirement of the clients for processing, sample ordering. Hand in hand altogether will create bright future!

Customer service :

Professional production, quality assurance, affordable, welcome to inquire, all factorydirect sale, customize MOQ 5000meters, within 5000meters spot supply. guarantee replacement if there is any quality problem for 30 days, 7 days no reason to return, the AS/Australia NZS2053.5:2001, take sample post, a variety of models according to the need to customize.

Items	Description
Brand	Hongfeng
Material	PVC
Fireproof rate	V0:Fireproof rate Away from the fire is extinguished within 5 seconds
Temperature	-80-160(℃)
Pressure resistance	1500(KV)
Length for each roll	customized
Thickness:	1.25-7.5mm
structure	Ripples inside and outside
Color:	customized
Supply Ability	100000 Meter/Meters per Week
Min.Order Quantity	5000meters
Standard:	EN61386
Payment Terms:	L/C,D/A,D/P,T/T,Western Union,MoneyGram
Port	Shanghai
Place of Origin	Zhejiang, China (Mainland)
Certification	ISO.UL94.SGS
Packaging & Delivery	plastic packing film or customized
Delivery cycle time	within 20 working days after receiving 30% deposit

In a dozen years, the company is committed to development and production for fire resistant plastic corrugated soft tube and plastic soft tube. The main products are over 10 kinds of various specs of plastic soft tube, and can customize colors, diameters and thickness according to customer’s request.